Unlike flat washers, metric fender washers have a larger outer diameter in proportion to their center hole. This allows them to evenly distribute load on thin sheet metals for a secure installation.
Use fender washers to secure materials during auto repair, plumbing and electrical work. They also provide a larger bearing surface to prevent pull-though.
Sizes
Fender washers are a type of flat washer with a large outer diameter in proportion to their central hole. This design helps distribute the load of a bolt or screw, which is particularly useful in areas where abrasion and other wear may be a concern.
Metric fender washers are available in many sizes to fit a wide variety of applications. They are also available in a range of metals including brass, steel, and stainless steel. Metric fender washers are also available in a range of finishes including phosphate coated, zinc plated and unfinished.
The most important thing to keep in mind when selecting a fender washer is the material you will be working with. Choosing the wrong material can cause damage and decrease the longevity of your work. This is especially true of fender washers used in applications where high-velocity work is required.
The best metric fender washers are the ones that fit your application and are made of a quality metal. Some of the more durable options include 316 or 18-8 stainless steel fender washers. They are also available in a wide selection of sizes to fit your budget.
Materials
Fender washers are flat and similar to standard washers, but with a proportionally larger outer diameter in relation to their center hole. This large outer diameter distributes the force that’s applied during tightening over a much wider area.
They’re commonly used in fastening sheet metal because they extend the bearing surface and help spread the load over a larger area. They also work well in repairing oversized holes that have expanded due to corrosion or wear.
Fender washers are typically made from very thin gauge metal and can be zinc plated to add corrosion protection. They are ideal for a variety of applications, including plumbing, electrical and automotive.
Applications
Fender washers are a type of flat washer with a much larger outer diameter in proportion to the center hole. They are used to distribute forces applied when tightening bolts and nuts.
They are made from thin gauge metals and typically have zinc plating for moderate corrosion resistance. They are commonly used in automotive, sheet metal and plumbing applications.
Another common use is in electrical and hydraulic projects where they offer insulation between aluminum surfaces and steel screws. They are also used to seal spaces in drywall and wood paneling.
Fender washers are often used when a large bearing surface is needed, like in a corroded or worn area where a standard flat washer cannot adequately cover it. Their large diameter and thin gauge metal make them ideal for evenly distributing the load of a fastener over a wider area.
Lock Washers
Lock washers are designed to secure fasteners that tend to lose friction or rotate, or that may otherwise become loose or unscrew. They exert a load, partially deform, and lock the fastener in place with a split coil or teeth that bite into the head of the fastener and against another flat surface.
Typically, they are deployed along with a flat washer. They are also used with hex bolts and nuts to distribute the load evenly across the thread.
They are available in a variety of shapes, sizes, and materials. They are commonly made of stainless steel, brass, bronze, or aluminum, but they can be manufactured from non-metal materials as well.
They are measured in both imperial and metric design units. Standard imperial washers are sized according to SAE or USS standards, and metric washers are sized according to JIS standards.
Leave a Comment
You must be <a href="https://cialisoverthecounternorx.com/wp-login.php?redirect_to=https%3A%2F%2Fcialisoverthecounternorx.com%2Fmetric-fender-washers%2F">logged in</a> to post a comment.